We have uncovered this great article relating to What Would Cause My Electric Water Heater to Stop Working? directly below on the net and thought it made sense to talk about it with you over here.
Numerous contemporary homes use an electrical hot water heater for their heating system, because of its comfort and also ease of use. Nevertheless, much like any other electric appliances, problems may develop with its use, all of a sudden. It can be actually irritating to awaken to a cold shower instead of a hot one or having your bathroom with water that isn't warm adequate or perhaps too warm. Whatever the case might be, water heater problems can be quite nerve-racking. Fortunately, we have actually made a checklist of feasible options to your hot water heater problems. There are a variety of aspects that might trigger a lot of these problems, it could be an issue with the power supply, the electric burner, or the thermostat. Prior to doing anything, guarantee you shut off the primary power supply for safety. Whatever the problem is, getting it fixed need to not posture way too much of a problem if you follow these steps:
Examine Your Power Supply:
As standard as this might seem, it is very necessary. Without adequate power, your hot water heater will not function. So the first thing to do when your water suddenly retires is to verify that it isn't a power issue. Check if the fuse is burnt out or the breaker tripped. If the circuit breaker is the concern, merely turn it off and on again. Replace any busted or damaged fuse. Check the home appliance with power after these modifications to see if it's now working.
Examine the Burner in the Hot Water Heater:
If it's not a power issue, then attempt looking into your burner if it is still working. Evaluate each of your heating elements to ensure the trouble isn't with any of them. If any of them is faulty, change that component and then check whether the warm water is back on.
Inspect Your Thermostat:
If your water heater still isn't working or the water appearing isn't hot enough, you might need to check the temperature level setups on your upper thermostat. Ensure the breaker is turned off before doing anything. Open up the gain access to panel as well as press the red button for temperature reset over the thermostat. This ought to help warm the water. Turn the circuit breaker back on and also inspect if the problem has actually been fixed.
Call A Professional:
If after changing all defective parts as well as resetting your temperature, the hot water heater still isn't working, you may require to contact a specialist plumber for an expert opinion. The issue with your heater could be that the cold and hot taps have actually been switched or it might be undersized for the amount of warm water needed in your house. Whatever the case might be, a professional plumber would certainly help address the issue.
Verdict
Water heater troubles are not always significant. A number of them result from minor concerns like a blown fuse or worn-out burner. Replacing the malfunctioning parts must do the trick. Nevertheless, if you are still unable to resolve the trouble, give a call to your closest plumber ahead to get it fixed.
Common Reasons Why Your Hot Water Heater Isn’t Working
Water Gets Too Hot
Ouch! You wanted a hot shower, not boiling! If you have a newer model electric water heater, your water heater works with a thermostat (actually, two thermostats). If this thermostat has been jostled — or purposely reset — by someone in your home, the water flow will be much hotter than you expected.
FIX: Adjust the thermostat to a more moderate setting for producing hot water. Forty-nine degrees Celsius is recommended to prevent scalding.
Water Doesn’t Get Hot
This is the opposite of the previous problem, but it’s almost as bad. Your flow of hot water is merely lukewarm or even incoming cold water. Once again, an incorrect thermostat setting, or a faulty thermocouple in a gas water heater, could be to blame. Another explanation might be that there’s no power to the water heater (in the case of an electric heater) or the pilot light has gone out (if you have a gas unit).
FIX: Adjust your thermostat as necessary. If that doesn’t do the trick, check the power supply. Another possibility is the replacement of a damaged thermocouple in gas water heaters.
Leaking Water Heater
A leaking water heater (a sign may be low hot water pressure, or not enough hot water to shower) might be a reason to push the panic button… but first, take a few minutes to check where the leakage is coming from. Leaks near the top of the heater tend to indicate a problem with a valve, which won’t need a major repair. However, a leak from the water heater base is more serious.
FIX: You may need a qualified plumber to replace your drain valve or TPR (temperature pressure relief) valve. When your water heater is leaking from below, your plumber might be able to fix it if you call them soon enough. Otherwise, you will need to have a new water heater installed.
Noisy Water Heater
Sometimes your water heater might make some peculiar noises, loud enough to compete with your singing in the shower. Are these a cause for alarm? It depends on exactly what kind of sounds you are hearing. Sizzles and rumbles are both red flags, indicating a heavy sediment buildup in your hot water tank that might cause a breakdown in the near future. In addition, banging is a sign of a water hammer, which can lead to serious damage to your pipes.
FIX: To stop sizzling or rumbling, turn off the tank and have it flushed by a reliable plumbing company ASAP. Ask your plumber to install a water hammer arrestor to quiet down the banging and save the pipes.
Pilot Light Keeps Going Out
Many pilot lights go out once in a while, but when your water heater pilot light keeps going out continually, it’s a problem. And the chances are good that that problem stems from either a shortage of combustible air or a malfunctioning thermocouple.
FIX: Increase the air supply around your water heater by cleaning dust and lint off the appliance and clearing any clutter from the area around it. A bad thermocouple will require expert plumbing repair and is more than basic gas water heater troubleshooting.
Water Smells Bad
The water from your residential plumbing pipes should smell neutral. If it has a strong unpleasant odour, something’s wrong. To check whether your water heater is at fault, turn on a hot water faucet and let it run for a few minutes. And, yes, use your nose to determine exactly what you are smelling.
FIX: For a garlicky odour, relight the pilot light on your water tank. When you detect the scent of garbage, you’ll need a professional plumber to flush the hot water tank and possibly replace the anode rod. A strong smell of rotten eggs could signal a hazardous gas leak; turn off the gas supply if possible, get everyone out of your house, and make an emergency call to the gas company.
Water Looks Brown Or Rusted
The first thing to do is ask yourself, “Is the brown, rusty-looking water coming only from my hot water taps?” If the answer is yes, then most likely, either the anode rod or the water heater interior is starting to rust, especially if your hot water heater is nearing the end of its life expectancy. (A “no” answer means the issue does not originate from the hot water heater but rather from the water supply.)
FIX: Contact a plumber to inspect the water heater. If you catch the problem quickly enough, it might be fixable. Otherwise, you’ll need a water heater replacement. Consider installation of an efficient new tankless water heater.
https://www.huskyair.com/blog/hot-water-heater-isnt-working/
We hope you liked our topic on What Would Cause My Electric Water Heater to Stop Working?. Thanks for taking a few minutes to read through our blog. Do you know about anybody else who is occupied with the niche? Do not hesitate to promote it. We cherish reading our article about No Hot Water — Water Heater Repair.
Get Quote Now